- Made in Germany -
EN 50291:2001 |
The CO-ALARM S/200-C is designed to detect carbon monoxide. It is intended for use in private homes.
The carbon monoxide alarm is equipped with a digital display to show the CO concentration. The device is equipped with a TEST button, which can be used to execute a complete function test of the CO-ALARM S/200-C.
The acoustic alarm during the alarm status can be turned off for 5 minutes. The CO alarm has two switching outputs which are used to control an alarm system or other signal transmitters and devices.
Alarm thresholds:
| CO - 50 ppm |
alarm between 60 and 90 minutes |
| CO - 100 ppm |
alarm between 10 and 40 minutes |
| CO - 300 ppm |
alarm in less than 3 minutes |
|
|
Technical data:
| 230 V model |
|
| Operating voltage |
230 V AC / 50 Hz |
| Power consumption |
max. 6 VA |
| 12 V model |
|
| Operating voltage |
12 V DC (-15% / +20%) |
| Current consumption |
max. 100 mA |
| Alarm volume |
>85 dB (A) / 1 m |
| Operating temperature |
-10°C / +40°C |
| Digital display |
3 digits / 7 segments,
reference value display |
| Protection level |
IPX2D |
| Dimensions |
140x125x42 mm (WxHxD) |
|
Equipment features:
- Digital display to show the CO concentration
- green power LED
- yellow fault LED
- red alarm LED
- TEST button
- mute function
- relay output, potential-free changeover
contact 5A/230V AC
- 12 V switching output, switched when an
alarm goes off, max. 200 mA
|
|
Gas detector according to EN 50194-1
Carbon monoxide detector according to EN 50291
top
